The table moves longitudinally only. This ensures full contact and support on the machine bed, even in the table limit position.

The column moves transversely only. This guarantees uniform contact between the column slide and the machine bed in any column position.

The spindle housing moves vertically only. This provides a constant distance between the vertical slide ways and the grinding wheel.

The flanged cartridge spindle is support by class 7 (CP4) matched angular contact ball bearings, which are preloaded and fit into the spindle cartridge. This will guarantee a maximum 2 micron run out.

The automatic lubrication system ensures all the critical components are lubricated with right amount of oil at all times.

The external and independent hydraulic unit eliminates the transfer of heat and vibration to the machine.

The control operates with preset increment and spark-out times grinding cycle for Plunge-cut and Surface grinding both with sequences of fine feed ~ spark-out ~ retraction. Spindle motor stop, coolant pump stop and table parking can be chosen in any combination.

Up to 120"X36". More sizes available.

The table moves longitudinally only. This ensures full contact and support on the machine bed, even in the table limit position.

The column moves transversely only. This guarantees uniform contact between the column slide and the machine bed in any column position.

The spindle housing moves vertically only. This provides a constant distance between the vertical slide ways and the grinding wheel.

The flanged cartridge spindle is support by class 7 (CP4) matched angular contact ball bearings, which are preloaded and fit into the spindle cartridge. This will guarantee a maximum 2 micron run out.

The automatic lubrication system ensures all the critical components are lubricated with right amount of oil at all times.

The external and independent hydraulic unit eliminates the transfer of heat and vibration to the machine.

The control operates with preset increment and spark-out times grinding cycle for Plunge-cut and Surface grinding both with sequences of fine feed ~ spark-out ~ retraction. Spindle motor stop, coolant pump stop and table parking can be chosen in any combination.

Up to 120"X36". More sizes available.

Three axes automatic surface grinder with small footprint.

Castings are made of high quality ribbed cast iron, which have been tempered to achieve extreme rigidity.

X&Y slide ways are laminated with Turcite-B, hand-scraped with sufficient lubrication. ( 250AHD with ball bearing table and D-2 (SKD-11) slide ways).

The elevation guide ways (Z axis) are hand-scraped then secured to the column structure.

The spindle is supported by CP4 preloaded super precision angular contact ball bearings. This will guarantee a maximum run-out of 2 microns for heavy duty, stable and accurate grinding.

Separate hydraulic system with a specially designed valve enables smooth table reversing with a 26 meter/min table speed.

Automatic lubricating system to ensure smooth and long lasting operation in all 3-axes.

Automatic down-feed gearbox for accurate down-feed increment.

Up to 120"X36". More sizes available.